 |
Angle Lines
This type of automation enables a firm to process, in the most efficient manner, these miscellaneous shapes by going from stock length material to finished parts in one automated CNC operation. The Ficep systems typically eliminate the manual layout and automates the production of holes, notches, part marking and cutting the finished part to length! The Ficep family of CNC controlled angle lines are available with either a roller feed drive and measuring system or a carriage type system with rack and pinion measuring for the ultimate in accuracy. The roller feed system is frequently used by fabricators who process shorter parts where the "T" Models are employed in those applications such as tower fabrication where the accuracy requirement for longer parts is of extreme importance. Click here to see some video action All the Ficep angle line products are based upon a PC based CNC control which is provided with the proprietary Ficep software that permits remote troubleshooting with a phone connection through a modem. Ficep Angle Line Specifications
Click here for roller feed angleline brochure Click here for rack & pinion angleline brochure Click here for A124 T Angle Line Flyer Want To Be Able To Not Only Process Angles But Also Flats
The versatility of the Ficep product line is further exhibited with the Type D angle and plate systems that provides such additional capabilities as plasma cutting and a CNC controlled flat stock shear with a programmable cutting angle to accomplish clipping and miter cuts, for example, in the most cost-effective manner. Click here to see some video action
Click here for a brochure on Type D2-D6 Click here for a brochure on Type D4-D8
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|
 |
 |
 |
 |
 |
 |
|
|||||||
 |
 |
|
||||||||||||||
 |
 |
|
||||||||||||||
 |
 |
 |
 |
 |
|
|||||||||||
 |
 |
 |
 |
|
||||||||||||
